OC9XSL moving coil stereo cartridge

Calculate Shipping

Customer collect from ESK QLD - $0.00 (ETA: 1 days)
After placing your order you can phone to make an appointment to collect from our premises in ESK QLD.

Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Special Line Contact as featured in our flagship ART1000, this diamond profile offers the ultimate in accurate sonic reproduction with a sense of space and realism to all instruments that few other configuration can achieve.

Features Nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response
A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Model	AT-OC9XSL
Mounting	1/2” centers / Threaded inserts
Frequency Response	20 - 50,000 Hz
Body Material	Aluminium
Channel Separation	28 dB (1 kHz)
Output Channel Balance	0.5 dB (1 kHz)
Output Voltage	0.4 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle	20 degrees
Vertical Tracking Force Range	1.8 to 2.2 g (standard 2.0 g)
Stylus Shape	Special Line Contact
Stylus Size	1.5 x 0.28 mil
Stylus Construction	Nude rectangular shank
Cantilever	0.28 mm Ø nude boron
Coil Impedance	12 Ohms (1 kHz)
Coil Inductance	25 μH (1 kHz)
DC Resistance	12 Ohms
Static Compliance	22 x 10 – 6 cm / dyne
Dynamic Compliance	18 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins	Brass
Wire Used for Coil	PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance	Min 100 Ohms
Cartridge Weight	7.6 g
Dimensions	17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included	1 non magnetic screw driver 1 brush 2 washers 4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm 1 plastic protector

(ATOC9XSL)

SKU	ATOC9XSL
Brand	AUDIO TECHNICA
Shipping Weight	0.2000kg
Shipping Width	0.110m
Shipping Height	0.050m
Shipping Length	0.110m
Shipping Cubic	0.000605000m3