VM95SH mm phono cartridge with Shibata diamond

Pickup from Esk QLD - $0.00 (ETA: 1 days)
Once you have placed your order please phone to make an appointment to collect.

This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus
Aluminum cantilever
Durable low-resonance polymer housing
Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
Compatible with any AT-VMN95 replacement stylus

SPECIFICATIONS

Frequency Response	20-25,000 Hz
Channel Separation	23 (dB at 1 kHz)
Vertical Tracking Force	1.8-2.2g (2.0g standard)
Stylus Construction	Nude square shank
Recommended Load Impedance	47,000 ohms
Output	3.5 mV (1 kHz, 5 cm/sec.)
Channel Balance	1.5 dB (1 kHz)
Stylus Shape	2.7 x 0.26 mil Shibata
Cantilever	Aluminium pipe
Mount	Half-inch
Replacement Stylus	AT-VMN95SH
Coil Impedance	3.3 k ohms (1 kHz)
DC Resistance	485 ohms
Load Capacitance	100 to 200 pF
Coil Inductance	550 mH (1 kHz)
Vertical Tracking Angle	23°
Dimensions	17.2mm H × 18.9mm W × 28.3mm D
Weight	6.1g
Accessories Included	Two 11mm installation screws, two 8mm installation screws, two washers, nonmagnetic screwdriver

(VM95SH)