PRO-JECT AUDIO

Vinyl NRS Box S3 (black)

Noise Reduction System

$399.00
RRP $499.00
SAVE $100.00 (20%)

SKU: PJVNRSS3



Calculate Shipping



Pickup from Esk QLD - $0.00 (ETA: 1 days)
Once you have placed your order please phone to make an appointment to collect.

  • Bring Your Vinyls Back To Life

    The problem with old vinyls

    Everyone has their favourite old vinyl record which has gotten damaged over time, is really noisy and probably not available to buy new anymore either. Many tracks are also not uploaded to streaming platforms, so the only way to listen to them is via your old vinyl records. For sure, the slight noise and clicks are part of the vinyl experience, but at some point, at excessive levels, it is not fun anymore and your favourite record might just stay in your shelf for the remainder of its long life. We know these problems and want to bring those records back on your turntable. The solution is now here, and it is called Vinyl NRS Box S3.

    How does it work?
    Connect the output of your phono preamplifier to the Vinyl NRS Box S3. First, the line signal gets digitized with a bit depth of 24-bits and a sampling rate of 96 kHz. If the input is too loud, the overflow LED will show it to you. You can then activate the -6 dB switch and the gain is fine now. The real magic happens in the digital domain.

    De-Crackling
    The signal gets filtered to not interfere with the processing itself. High frequency components are used as a marker for crackles. The dedicated algorithm can now detect these peaks. You can easily
    adjust the sensitivity with the potentiometer on the front. The LED gives you instant feedback on the process. Crackling parts can be reduced by up to 8 dB which is a big improvement for the listening experience. If you don‘t want to use the De-Crackling function, just turn the potentiometer completely to the left and the algorithm is in bypass.

    Vinyl Noise Reduction System (VNRS)
    The signal is first separated into two frequency bands and then fed into two expanders, which increase the signal-to-noise ratio. There are no noise modulations audible using this technique! We are able to reduce the noise by up to 8 dB.

    Connection & Setup

    The Vinyl NRS Box S3 is connected between the phono preamp and your preamp or integrated amplifier. If you turn it on, the Vinyl NRS Box S3 is active immediately. If you don‘t want it in your signal path, just turn it off and the device is bypassed and the inputs are galvanicaly connected to the outputs. There are two De-Crackling intensity algorithms available: the basic one processes the signal very lightly; the advanced is stronger with more heavy processing. Always try the basic setting first & adjust the intensity with the potentiometer. By pressing the „Intensity“ button you can engage the advanced mode if wanted and/or necessary. The LED shows you if clicks & crackles are reduced. If you‘re happy with the De-Crackling setting, but you can still hear a lot of noise, you can now activate the Vinyl Noise Reduction feature by pressing the VNRS button. There is only one preset for the Vinyl Noise Reduction feature and it cannot be customized in the same way the De-Crackling can be adjusted.

  • StereoNet Review

  • Technical Specifications

    Internal sampling: 96 kHz/24 bits
    Internal processing: 56-bit accumulator, double precision
    Frequency response 20Hz to 20 kHz: -0,6 dB / +0,1dB
    Frequency response 30Hz to 20 kHz: -0,2 dB / +0,1dB
    Clip indication: -0,6 dB below real clipping
    Bypass mode: galvanic linked together (Rlink<0,3 ohm)
    THD: <0,009% (500 mVrms Input Level)
    VNRS noise/rumble reduce: up to 8dB (20Hz to 20 kHz)
    De-Click reduce (basic): 8 dB (3kHz to 20 kHz)
    De-Click reduce (intensity): 12 dB (2kHz to 20 kHz)
    Outboard power supply: 18V/500mA DC, suitable for your country's mains supply
    Power consumption in standby: 0W OFF/Standby, 2.2W ON (without outboard power supply)
    Dimensions: WxHxD (D with sockets): 103 x 37 x 104 (119) mm
    Weight: 340 g without power supply

(PJVNRSS3)

SKU PJVNRSS3
Brand PRO-JECT AUDIO
Shipping Weight 0.5400kg
Shipping Width 0.220m
Shipping Height 0.080m
Shipping Length 0.190m
Shipping Cubic 0.003344000m3

1 Year Warranty

Be The First To Review This Product!

Help other Decibel Hi Fi users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


EVO3 Elite Power Cable (2m Length)

ISOTEK

EVO3 Elite Power Cable (2m Length)

$629.00 EVO3EPC

40% OFF RRP $1,049.00
CD Box E CD player

PRO-JECT AUDIO

CD Box E CD player

$399.00 PJCDE

20% OFF RRP $499.00

More From This Category


Audiophile Archival MM Phono Preamp MkII

REK-O-KUT

Audiophile Archival MM Phono Preamp MkII

$198.00 RKAAP2

De-Hisser

REK-O-KUT

De-Hisser

$550.00 RKDH

15% OFF RRP $650.00
MC TX transformer

ICON AUDIO

MC TX transformer

$1,050.00 MCTX

MC1  moving coil transformer

ROTHWELL

MC1 moving coil transformer

$660.00 RWMC1

MCL  moving coil step-up transformer

ROTHWELL

MCL moving coil step-up transformer

$1,100.00 RWMCL

MCX moving coil step-up transformer

ROTHWELL

MCX moving coil step-up transformer

$1,100.00 RWMCX

PHO-701 Tube Phono Preamplifier

VINCENT

PHO-701 Tube Phono Preamplifier

Separate preamp and power supply units

$980.00 VPHO701

7% OFF RRP $1,049.00
Phono Box DS2 phono stage (black)

PRO-JECT AUDIO

Phono Box DS2 phono stage (black)

$479.00 PJPBDS2

20% OFF RRP $599.00