AUDIO TECHNICA

moving coil stereo cartridge

Nude Microlinear stylus and Boron cantilever

$944.00
RRP $1,049.00
SAVE $105.00 (10%)

SKU: ATOC9XML



Calculate Shipping

Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Microlinear complex diamond profile enabling higher frequency response, detail like never before experienced and limiting inner groove distortion. Microlinear diamond profile provides low record and stylus wear.

  • Features nude Microlinear stylus and boron cantilever which provides lower distortion and high transient response
  • A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required 
  • Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer 
Model AT-OC9XML
Mounting 1/2” centers / Threaded
Frequency Response 20 - 47,000 Hz
Body Material Aluminium
Channel Separation 27 dB (1 kHz)
Output Channel Balance 1.0 dB (1 kHz)
Output Voltage 0.4 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Microlinear
Stylus Size 2.2 x 0.12 mil
Stylus Construction Nude square shank
Cantilever 0.28 mm Ø nude boron
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 – 6 cm / dyne
Dynamic Compliance 16 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Cartridge Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non magnetic screw driver
1 brush
2 washers
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector

 

(ATOC9XML)

SKU ATOC9XML
Brand AUDIO TECHNICA
Shipping Weight 0.2000kg
Shipping Width 0.110m
Shipping Height 0.050m
Shipping Length 0.110m
Shipping Cubic 0.000605000m3

Be The First To Review This Product!

Help other Decibel Hi Fi users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


VM95ML mm phono cartridge with MicroLine diamond

AUDIO TECHNICA

VM95ML mm phono cartridge with MicroLine diamond

$299.00 VM95ML

 Moving coil stereo cartridge

AUDIO TECHNICA

Moving coil stereo cartridge

Low mass nude elliptical stylus and aluminium cantilever

$599.00 ATOC9XEN

14% OFF RRP $699.00
OC9XSL moving coil stereo cartridge

AUDIO TECHNICA

OC9XSL moving coil stereo cartridge

Nude Special Line Contact stylus and Boron cantilever

$1,259.00 ATOC9XSL

10% OFF RRP $1,399.00

More From This Category


 Moving coil stereo cartridge

AUDIO TECHNICA

Moving coil stereo cartridge

Low mass nude elliptical stylus and aluminium cantilever

$599.00 ATOC9XEN

14% OFF RRP $699.00
ART9X Flagship Moving Coil Cartridges

AUDIO TECHNICA

ART9X Flagship Moving Coil Cartridges

Shibata or Special Line Contact diamonds

From $2,299.00 ATART9X

See Options
AT33SA Moving Coil Cartridge

AUDIO TECHNICA

AT33SA Moving Coil Cartridge

The first AT cartridge to feature a Shibata stylus

$1,199.00 AT33SA

Cadenza Black

ORTOFON

Cadenza Black

$3,959.00 OCBK

Cadenza Blue

ORTOFON

Cadenza Blue

$2,749.00 OCBU

Cadenza Bronze

ORTOFON

Cadenza Bronze

$3,299.00 OCBZ

Cadenza Mono mc cartridge

ORTOFON

Cadenza Mono mc cartridge

$1,759.00 OCM

Cadenza Red

ORTOFON

Cadenza Red

$1,869.00 OCRD