AT33SA Moving Coil Cartridge

The first AT cartridge to feature a Shibata stylus

$1,199.00

SKU: AT33SA



Calculate Shipping



Pickup from Coopers Plains - $0.00 (ETA: 1 days)
Once you have placed your order please phone to make an appointment to collect.

The AT33Sa is the first Audio-Technica MC cartridge model to feature a Shibata stylus. In addition to its superior high-range performance as a line-contact stylus, the Shibata stylus produces mid and bass sound that is strong and rich. The Shibata stylus is mounted on a boron cantilever with a double damper to greatly improve sound quality.

Advanced tapered boron cantilever and reduced weight
The AT33Sa uses a tapered boron cantilever. Tapering the cantilever and revising the number of coil rotations reduce the weight, giving the cartridge better high range performance and wide range reproduction.

Neodymium magnet with dramatically enhanced magnetic energy and permendur yoke
The model uses a neodymium magnet with maximum energy product BHmax of 50 [kJ/m3] and a permendur yoke with high saturation flux density and outstanding magnetic properties, which further enhances the concentrated magnetic field of the coil gap.

Neodymium magnet for dramatically increased magnetic energy
The neodymium magnet provides maximum energy (BHmax of 50[kJ/m3]), while the pure iron yoke provides excellent magnetic properties. Together, they further boast the magnetic field concentrated in the coil gap area.

PCOCC coil
The PCOCC coil enables purer transmission because it is not subject to grain boundaries in the direction of transmission. *PCOCC = Pure Copper by Ohno Continuous Casting process (Monocrystalline high-purity oxygen- free copper)

High-separation, wide response dual moving coil
The basic structure is an original MC type, with separate cylindrical coils to the left and right channels. Since power is generated independently in each of the left and right channels, this structure offers truly superior separation. If the signal from the opposite channel escapes, this can cause intermodulation distortion and have a decisive impact on audio quality and how the stereo sound spreads. The structure of this product ensures a clear and smooth sound. Additionally, the two coils have a reverse-V shape which reduces effective moving mass as seen from the stylus tip, limiting unnecessary movement of the coil and further eliminating distortion.

VC mould limits unnecessary vibration
The VC mould that affixes the coils is made with hard synthetic resin containing potassium titanate to make it highly strong and rigid. This improvement results in a lighter product, which reduces unnecessary vibration.

A tough body designed to be rigid
The product’s housing is made of precision-cast hard aluminium alloy. Hard synthetic resin sandwiching in the structure on the top and bottom suppresses parasitic resonance. This minimises unnecessary noise while enhancing rigidity and the signal-to-ratio.

Features

  • Advanced tapered boron cantilever and reduced weight
  • Neodymium magnet with dramatically enhanced magnetic energy
  • PCOCC coil
  • High-separation, wide response dual moving coil
  • VC mold limits unnecessary vibration
  • A tough body designed to be rigid

Specifications

Type

Dual Moving Coil

Mounting

1/2” centers

Frequency Response

15 – 50,000Hz

Body Material

Aluminium/Synthetic Resin

Channel Separation

30dB (1kHz)

Output Channel Balance

0.5dB (1kHz)

Output Voltage

0.4mV (1kHz and 5cm/sec.)

Vertical Tracking Angle

23°

Vertical Tracking Force Range

1.8 – 2.2g (2.0g standard)

Stylus Shape

Shibata

Stylus Curvature Radius

Shibata

Stylus Construction

Nude square shank

Cantilever

Nude tapered boron

Coil Impedance

10Ω (1kHz)

Coil Inductance

22 µm (1kHz)

DC Resistance

10Ω

Static Compliance

40×10-6cm/dyne

Dynamic Compliance

10×10-6cm/dyne (100Hz)

Recommended Load Impedance

Min 100Ω

Weight

6.9g

Dimensions

H16×W16.6×D26.5mm

Accessories

1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)

(AT33SA)

SKU AT33SA
Barcode # 4961310128968
Brand AUDIO TECHNICA
Shipping Weight 0.2000kg
Shipping Width 0.016m
Shipping Height 0.026m
Shipping Length 0.016m
Shipping Cubic 0.000007m3

Be The First To Review This Product!

Help other Decibel Hi Fi users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


AUDIO TECHNICA AT7V mm cartridge

AUDIO TECHNICA AT7V mm cartridge

$250.00 AT7V

ORIGIN LIVE  Linn arm board for Rega

ORIGIN LIVE Linn arm board for Rega

$66.00 OLLABR

ORTOFON Cadenza Bronze

ORTOFON Cadenza Bronze

$2,999.00 OCBZ

ORTOFON Cadenza Blue

ORTOFON Cadenza Blue

$2,499.00 OCBU

ORTOFON Cadenza Red

ORTOFON Cadenza Red

$1,699.00 OCRD

ORTOFON MC Windfield

ORTOFON MC Windfield

$4,456.00 OWF


More From This Category


AUDIO TECHNICA ART9 Flagship Moving Coil Cartridge

AUDIO TECHNICA ART9 Flagship Moving Coil Cartridge

This is real music at its best

$1,499.00 ATART9

AUDIO TECHNICA AT-F7 moving coil cartridge

AUDIO TECHNICA AT-F7 moving coil cartridge

Best value moving coil cartridge

$396.00 ATF7

BENZ MICRO Glider SL mc phono cartridge

BENZ MICRO Glider SL mc phono cartridge

$1,390.00 BMGSL

KISEKI Blue NS moving coil cartridge

KISEKI Blue NS moving coil cartridge

$2,999.00 KBNS

ORTOFON Cadenza Black

ORTOFON Cadenza Black

$3,599.00 OCBK

ORTOFON Cadenza Blue

ORTOFON Cadenza Blue

$2,499.00 OCBU