Inserts warmth and colour into transistor amplifiers
Designed for transistor amplifiers where some valve “warmth and colour “is required
The New BA3 buffer amplifier comes in a “one box” configuration for more convenient positioning.
Not everyone is willing or able to change to valve amplifiers. But many hi fi fans find their system can sound too harsh and tiring to listen to for long periods of time. The BA3 is designed to fit between any two units of hi fi and will insert some “warmth and colour” making your hi fi system more pleasant to listen to.
Although Valves and Solid State amplifiers both do the same job, they do it differently - microchips are excellent for digital circuits, valves are increasingly recognised as having musical qualities that are impossible to “see” in specification or measurement.
A “buffer” amplifier does not amplify the signal voltage, but increases its strength (or current). In the process of passing the signal through a vacuum tube, subtle changes are made to its nature, which many people perceive as an improvement.
Hi Fi has now reached a level where enthusiasts can detect the tiny improvements of power conditioning, cables, interconnects etc, and of course the difference between transistors and valves.
So it follows that an all valve, triode, Class A buffer stage can add something that you may be missing!
It may be connected for example between a CD player and amplifier, or between a pre and power amplifier. It is also extremely effective at reducing the loss of long connecting cables. E.G:
All cables have high frequency loss, even exotic interconnects can have a relatively large capacitance per meter, so a 10 m cable will absorb 10 times more high frequency detail than a one meter length. So if the output impedance of your preamp is not as good as it could be, you will lose vital high frequency detail. It is not a question of amplification but of “muscle” to make sure that no detail is lost on the way through your interconnects.
Specifications and Features
• Comprehensive manual supplied
• All hand wired point to point
• No printed circuit board to ‘colour’ sound
• Class A, all Triode circuit
• Very low output impedance of 180Ω
• 2x ECC82 double triodes
• Gain = 0.96
• Maximum output before clipping= 30v
• Ideal for any input from 50mv to 10v
• Signal to noise level better than -90db
• Frequency response 10hz to 100khz –0.1db
• THD typically less than 0.05% 1khz
• Solen hi fi audio capacitors
• Silver PTFE audio cable
• Gold plated Input & output terminals
• One line input/line output
• 220/240volts 50 watts.
• C E, ROHS FCC
• Dimensions: 31cmW x 14.5D x 12.5H
• Packed Weight= 4kg 39cm W x 23cm D x 25cm H
(Specifications subject to change)
An inexpensive way of adding some valve magic into your system whilst keeping your existing equipment.
1 Year Warranty
Be The First To Review This Product!
Help other Decibel Hi Fi users shop smarter by writing reviews for products you have purchased.