Gold plated spade connectors (set of 4)

Versatile and easy-to-assemble DIY gold plated connectors. They offer high quality contact over long periods of intensive use and are very effective in keeping oxidation away.

NOT SUITABLE FOR SOLID CORE CABLE

• 24 carat gold plated, screw-on, solderless connectors 

• Available in packs of four angled spades (fork) or banana plugs with red or blue rings for polarity identification 

• Only suitable for multi-strand loudspeaker cable and wire types. Minimum values: AWG 12 (Ø2 mm), for the bare conductor, and Ø 6.5 mm for jacket diameter   

• The banana and the angled fork spade screw-on terminals are WBT binding post fitting. Both offer excellent mating properties and minimal contact resistance. 

• The high pressure clamping ensures low loss electrical connection and maximum signal transfer 

• Banana terminal (standard Ø4 mm pin) 

• Angled fork spade terminal fits studs from Ø 6.0 mm to Ø 8.5 mm. 

• Easy assembly instructions (4 steps): 

1. Strip off 14mm of the multi-strand cable/wire jacket

2. Insert the stripped end through the screw-on collar

3. Fan out the strands and evenly fold them encircling the collar

4. Insert the banana pin/spade blade and screw-on to the collar

• These connectors fit the following cables and wires: