AUDIO TECHNICA OC9XML moving coil stereo cartridge

Nude Microlinear stylus and Boron cantilever

$1,049.00

SKU: ATOC9XML



Calculate Shipping



Pickup from Coopers Plains - $0.00 (ETA: 1 days)
Once you have placed your order please phone to make an appointment to collect.

Since its introduction more than 30 years ago, Audio-Technica’s pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Microlinear complex diamond profile enabling higher frequency response, detail like never before experienced and limiting inner groove distortion. Microlinear diamond profile provides low record and stylus wear.

  • Features nude Microlinear stylus and boron cantilever which provides lower distortion and high transient response
  • A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required 
  • Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer 
Model AT-OC9XML
Mounting 1/2” centers / Threaded
Frequency Response 20 - 47,000 Hz
Body Material Aluminium
Channel Separation 27 dB (1 kHz)
Output Channel Balance 1.0 dB (1 kHz)
Output Voltage 0.4 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Microlinear
Stylus Size 2.2 x 0.12 mil
Stylus Construction Nude square shank
Cantilever 0.28 mm Ø nude boron
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 – 6 cm / dyne
Dynamic Compliance 16 x 10 – 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Cartridge Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non magnetic screw driver
1 brush
2 washers
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector

 

(ATOC9XML)

SKU ATOC9XML
Brand AUDIO TECHNICA
Shipping Weight 0.2000kg
Shipping Width 0.110m
Shipping Height 0.050m
Shipping Length 0.110m
Shipping Cubic 0.000605000m3

Be The First To Review This Product!

Help other Decibel Hi Fi users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


ORIGIN LIVE Tonearm structural modification

ORIGIN LIVE Tonearm structural modification

Dramatically improves performance at a low price

$176.00 OLSM

SRM Tech 3mm acrylic platter mat

SRM Tech 3mm acrylic platter mat

$110.00 MGSAPM3


More From This Category


AUDIO TECHNICA AT-F7 moving coil cartridge

AUDIO TECHNICA AT-F7 moving coil cartridge

Best value moving coil cartridge

$440.00 ATF7

AUDIO TECHNICA OC9XEB moving coil cartridge

AUDIO TECHNICA OC9XEB moving coil cartridge

Bonded Elliptical stylus & aluminium cantilever

$469.00 ATOC9XEB

AUDIO TECHNICA OC9XEN moving coil stereo cartridge

AUDIO TECHNICA OC9XEN moving coil stereo cartridge

Low mass nude elliptical stylus and aluminium cantilever

$699.00 ATOC9XEN

Audio Technica OC9XSH moving coil stereo cartridge

Audio Technica OC9XSH moving coil stereo cartridge

Nude Shibata stylus and Boron cantilever

$1,249.00 ATOC9XSH

Audio Technica OC9XSL moving coil stereo cartridge

Audio Technica OC9XSL moving coil stereo cartridge

Nude Special Line Contact stylus and Boron cantilever

$1,399.00 ATOC9XSL

BENZ MICRO Glider SL mc phono cartridge

BENZ MICRO Glider SL mc phono cartridge

$1,390.00 BMGSL

JICO SETO-HORI moving coil cartridge

JICO SETO-HORI moving coil cartridge

Ceramic body, boron cantilever, microridge diamond

$1,469.00 A100900

KISEKI Blue NS moving coil cartridge

KISEKI Blue NS moving coil cartridge

$2,895.00 KBNS