Threaded VTA adjuster for Rega tonearms.
Finally, a clever inexpensive, solution to a Perplexing problem! No more arm removals to insert shims for adjusting the VTA of you phono cartridge. Simply install the Isovert on your rega RB 250 (remove the black plastic push on ring at the top of the threaded base before fitting) or RB300 tonearm for infinite adjustment of VTA without losing the rigid mounting so important to proper sound reproduction.
NOTE: The Isovert requires a 1 1/8 diameter-mounting hole. This may require enlargement of the existing mounting hole
Installation of the Isovert raises the tonearm 1.75mm from the standard. This is slightly less than the thinnest shim (2mm) that Rega Manufactures .
If your arm is already at the right height or correct VTA before installing the Isovert ,and no Rega VTA shims are installed the arm will be too high with the Isovert even at the lowest setting unless you can lower the arm board. The Isovert should not be used.
Kit comprising VTA adjuster and hand adjustable bottom tone arm fastening
Rega tone arm VTA vertical tracking alignment allowing quick and easy adjustment of VTA
Fits Rega RB300 RB600 RB900 also Moth and other Rega derivative arms
Be The First To Review This Product!
Help other Decibel Hi Fi users shop smarter by writing reviews for products you have purchased.