AUDIO TECHNICA stylus assembly for AT7V cartridge

$165.00

SKU: ATN7V



Calculate Shipping



Pickup from Coopers Plains - $0.00 (ETA: 1 days)
Once you have placed your order please phone to make an appointment to collect.

This is a genuine Audio Technica stylus assembly for the AT-7V cartridge.

The Audio Technica AT-7V cartridge is alluringly musical. It faithfully extracts and expresses the recorded musical artistry and complete harmonic sound quality lost in the detail by so many other more expensive cartridges. With independent left and right magnets and PCOCC coil, it offers music listeners and audio enthusiasts a new high in fidelity and sound quality.

It works wonders in rejuvenating systems with lackluster sound. Rediscover how good your records really sound!

The Audio Technica AT-7V uses a proven cartridge design elevated to a new level of significance by the use of advanced proprietary knowledge, very high quality materials and superior quality control. It uses the same cartridge body of the 100 series. Yes - the very same one used in many of the great sounding Signet cartridges beloved by many music listeners. So how does it really sound? Outstanding! It offers delicacy with a tinge of sweetness, crispness, clarity and resolution. During our listening sessions, we heard sounds that we hadn't noticed and enjoyed before - such as the tremble of the voice, the declining harmonics. It is a revelation. For those jaded by the mundane sound of ordinary cartridges, here is a cartridge that will embrace your senses, soothe your tired soul and fill the emptiness with the gift of music.

Audio-Technica AT7V Cartridge Technical Description
- Tonearm mount: Standard 1/2 inch
- Type: Moving Magnet, VM dual-magnet stereo cartridge
- Frequency response: 15 - 25,000 Hz
- Output voltage: 5.0 mV (1kHz and 5 cm/sec)
- Tracking force: 1.75 - 2.25 g (2.0 g standard)
- Load impedance: 47K ohms
- Channel separation: 27dB (1kHz)
- Channel balance: better than 1.5dB (1kHz)
- Dynamic compliance: 7.0 x 10-6 cm/dyne
- Static compliance: 35 x 10-6 cm/dyne
- Vertical tracking angle: 23°
- Cantilever: Tapered aluminum alloy
- Stylus: Grain-oriented Square Shank Nude Special Elliptical diamond with 0.2 x 0.7 mil tracing radii
- External size: H17.3.x W15.2 x D26.5 mm
- Weight: 6.2g
- Replacement stylus: Audio-Technica ATN7V (knob color: Indigo)
- Accessories included: Screwdriver, screws - 6mm x 2 pcs, 11mm x 2 pcs, 2 nuts, 2 washers

(ATN7V)

SKU ATN7V
Brand AUDIO TECHNICA
Shipping Weight 0.1300kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.030m

Be The First To Review This Product!

Help other Decibel Hi Fi users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


AUDIO TECHNICA AT95 with Vivid Line stylus

AUDIO TECHNICA AT95 with Vivid Line stylus

better tracking, lower wear, and more detail retrieval

$187.00 AT95VL

Replacement pads for DISC DOCTOR Brushes A (2 pairs)

Replacement pads for DISC DOCTOR Brushes A (2 pair

To replenish your Disc Doctor cleaning brush

$27.50 DDBAP

DAYTON AUDIO T-Amp

DAYTON AUDIO T-Amp

NO LONGER AVAILABLE - we recommend the LEPAI LP2020A

$82.50 wDTA1

GRADO SR80e Prestige Series Headphones

GRADO SR80e Prestige Series Headphones

$149.00 GSR80E


More From This Category


AUDIO TECHNICA  Microline stylus for AT150MLX

AUDIO TECHNICA Microline stylus for AT150MLX

$550.00 ATN150MLX

AUDIO TECHNICA  Microline stylus for AT440MLb

AUDIO TECHNICA Microline stylus for AT440MLb

Discontinued model - limited stock available

$297.00 ATN440MLb

GARROTT FGS stylus for  Optim FGS

GARROTT FGS stylus for Optim FGS

$660.00 GOSFGS